Who is This Wire Stripper For? This model are easy to operate, convenient to carry, energy saving, for s This picture shows trim that I just started to pull through the slot and past the knife. This is a good idea for large cables but for the three smaller cables within a power cable then it would get a bit fiddly. Turn the adjusting screws clockwise with the Allen wrench included with the tool to make a deeper cut. With all of these techniques, the key is to control the depth of the cut to avoid cutting or gouging the conductor.
Best Wire Stripping Tool – Reviews (Professional & Amateur Choices)
I have had no end of trouble trying to get rid of scrap wire here. With the price of salvage copper where it is today it makes sense to recycle your used copper cable and wire. Auto-adjust function Auto-stop to two seperate lengths Built in crimper and cutters Specially designed teeth for one handed operation. Thankfully, there are still plenty of traditional best wire strippers in the market. Auto-Size Squeeze-n-Strip Flat Cable Stripper Just feed cable through the front and squeeze the handle to strip cable in the middle or end. Remember, if you gouge the insulation or nick the wires inside, cut off the cable at that point and try again.
Wire stripper - Wikipedia
Pull conductors through stripper Strip individual conductors by lining them up in the correct notch and squeezing the stripper to cut through the plastic. First you remove the outer plastic sheathing. The body of the machine is made of aluminum alloy, a material that is extremely sturdy, yet very lightweight. Large range of wires to strip Auto-stop feature Tension wheel you can adjust yourself. The Jonard JIC is a fiber optic stripping cable with three separate settings. Includes two extra blades. I was thinking the same thing, there is little need for the mechanical advantage he has it setup for.
The machine is also great for the fact that it is very convenient to use. Manual wire stripping machines are favored by people for two reasons. A little experimentation will go along way here. This idea is becoming more and more popular with professional electricians and people who use the tool daily. Entangled and straight wires can be stripped using this tool. This is the feeding wheel. To make it easier to pull the wire through the slot I used a plastic block to press the wire down over the blade and used plastic side blocks.